News List
As a product often used in work, the effectiveness of composite machines is very good. We believe that everyone also understands this, and it has good effects in our daily lives. However, how does this type of product work? Here is a brief introduction for everyone.
What are the working principles of the composite machine during the production process?
1. Preparation
Firstly, according to the orientation direction of the installation foundation of each guide roller, the adhesive promoter is proportionally adjusted to start heating the oven system. When the corresponding set temperature is reached, the driving motor is then turned on to start coating production.
2. Coating
The substrate of the unwinding device can be first passed through a mesh roller, coated with adhesive, and then dried through a drying channel, completing the coating process.
3. Composite
The EPC liquid enters the composite material of the correction section and the joint part of the second unwinding substrate, enabling the lamination process to be achieved.
4. Cooling and winding
After cooling the coil, the equipment manufacturer of the coating machine has completed the overall development and production of the substrate for processing. During production, attention should be paid to the following issues:
(1) Adjust the composite pressure between two composite rollers by adjusting the relative distance between them.
(2) By adjusting the clamping control substrate of the clutch and brake through stretching tension and tension winding tension, the operation of the smoothing machine has produced good coating quality and composite effect.
(3) Adjust the flatness of the substrate by adjusting the position of the rubber roller.
